LWC, Pancake ACR Coils
Pancake coiled copper tube which is named for its coiled style, is widely used on the connecting for the separated air-condition. On the other hand it is used in water distribution systems, chilled water mains, drainage and vent systems, heating systems (includingsolar), fuel-oil systems, oxygen systems also in non-flammable medical-gas systems.
They are produced that Copper fluid is casting to the billet moulds and follows to the extrusion press, after annealed tubes are drawing, to be copper tubes. They are according with DIN EN 1057, DIN EN 13348, DIN EN 13600, ASTM B280, ASTM B68, ASTM B75, TS 380
Dimensions Table For Coil Copper Tube
Outside Diameter | Wall Thickness | Approx Weight | Outside Diameter | Wall Thickness | Approx Weight | ||||||
(inch) | (mm) | (inch) | (mm) | (lb/ft) | (kg/m) | (inch) | (mm) | (inch) | (mm) | (lb/ft) | (kg/m) |
3/16 | 4,76 | 0,015 | 0,40 | 0,032 | 0,048 | 1/2 | 12,70 | 0,015 | 0,40 | 0,092 | 0,138 |
3/16 | 4,76 | 0,019 | 0,50 | 0,038 | 0,058 | 1/2 | 12,70 | 0,019 | 0,50 | 0,114 | 0,170 |
3/16 | 4,76 | 0,026 | 0,68 | 0,051 | 0,076 | 1/2 | 12,70 | 0,026 | 0,68 | 0,153 | 0,228 |
3/16 | 4,76 | 0,030 | 0,78 | 0,057 | 0,085 | 1/2 | 12,70 | 0,030 | 0,78 | 0,174 | 0,260 |
3/16 | 4,76 | 0,039 | 1,00 | 0,068 | 0,102 | 1/2 | 12,70 | 0,039 | 1,00 | 0,219 | 0,326 |
1/4 | 6,35 | 0,015 | 0,40 | 0,045 | 0,067 | 5/8 | 15,87 | 0,015 | 0,40 | 0,116 | 0,173 |
1/4 | 6,35 | 0,019 | 0,50 | 0,054 | 0,081 | 5/8 | 15,87 | 0,019 | 0,50 | 0,143 | 0,214 |
1/4 | 6,35 | 0,026 | 0,68 | 0,072 | 0,108 | 5/8 | 15,87 | 0,026 | 0,68 | 0,194 | 0,289 |
1/4 | 6,35 | 0,030 | 0,78 | 0,081 | 0,122 | 5/8 | 15,87 | 0,030 | 0,78 | 0,221 | 0,329 |
1/4 | 6,35 | 0,039 | 1,00 | 0,100 | 0,149 | 5/8 | 15,87 | 0,039 | 1,00 | 0,278 | 0,415 |
5/16 | 7,93 | 0,015 | 0,40 | 0,056 | 0,084 | 3/4 | 19,05 | 0,015 | 0,40 | 0,139 | 0,208 |
5/16 | 7,93 | 0,019 | 0,50 | 0,069 | 0,103 | 3/4 | 19,05 | 0,019 | 0,50 | 0,174 | 0,259 |
5/16 | 7,93 | 0,026 | 0,68 | 0,092 | 0,138 | 3/4 | 19,05 | 0,026 | 0,68 | 0,234 | 0,349 |
5/16 | 7,93 | 0,030 | 0,78 | 0,104 | 0,156 | 3/4 | 19,05 | 0,030 | 0,78 | 0,267 | 0,398 |
5/16 | 7,93 | 0,039 | 1,00 | 0,129 | 0,193 | 3/4 | 19,05 | 0,039 | 1,00 | 0,338 | 0,504 |
3/8 | 9,52 | 0,015 | 0,40 | 0,068 | 0,102 | ||||||
3/8 | 9,52 | 0,019 | 0,50 | 0,084 | 0,126 | ||||||
3/8 | 9,52 | 0,026 | 0,68 | 0,112 | 0,168 | ||||||
3/8 | 9,52 | 0,030 | 0,78 | 0,128 | 0,191 | ||||||
3/8 | 9,52 | 0,039 | 1,00 | 0,159 | 0,238 |